Button batteries are widely used in the consumer electronics field. At the same time, due to the potential safety hazards they may pose to childrens health, exporting to different countries requires meeting strict laws, regulations, and technical standard requirements. This article will introduce the HS code of button batteries, export precautions, and relevant regulatory requirements to help enterprises remain compliant in international trade.

I. HS Code of Button Batteries

Button batteries are mainly classified into the following HS codes according to their chemical composition and usage:

1. Lithium button batteries: 8506.50.00
   Applicable to single - cell lithium - ion batteries, whether or not equipped with positive and negative electrode protection devices.
2. Other chemical button batteries (such as alkaline batteries, silver oxide batteries): 8506.80.00
   Applicable to non - lithium - based button batteries, such as alkaline batteries and silver oxide batteries.
3. Devices with button batteries:
   The specific HS code is determined according to the function of the device. For example, a remote control with a button battery may be classified as 8526.92 (remote control device).

When declaring, the HS code should be accurately selected according to the material, usage and packaging form of the battery to avoid customs clearance delays or the risk of return of documents.

II. Precautions for Button Battery Exports

Product Compliance Requirements

Button battery exports must meet the safety, environmental protection, packaging and labeling requirements of the target market. For example:

• United States: It is required to meet the provisions of Reeses Law and 16 CFR 1263.
• European Union: It must comply with the RoHS Directive, REACH Regulation and Battery Directive.
• China: Exports require the provision of product quality inspection reports andIt is recommended to verify through the following methods:certification.

Packaging and Labeling

• Child - resistant packaging: The packaging of button batteries must meet the poison - prevention packaging requirements of 16 CFR 1700.15 to ensure that children have difficulty opening the packaging.
• Warning label: The product name, warning statements, correct storage methods and disposal methods should be clearly marked on the packaging. For example: WARNING: Keep out of reach of children. Swallowing may lead to severe injuries or death. Seek immediate medical attention if swallowed.,
• Language Requirements: The warning label should use the official language of the target market. For example,for containers exported to the USit is required to use English.

Transportation and Logistics

Button batteries fall within the scope of dangerous goods transportation and need to comply with the International Air Transport Association Dangerous Goods Regulations (IATA DGR) and the International Maritime Dangerous Goods Code (IMDG Code).Air TransportationClassificationMaritime Transportation: According to the United Nations dangerous goods classification, button lithium - ion batteries belong to Class 9 dangerous goods.

• : Use UN - certified packaging to ensure that the battery will not short - circuit, leak or be damaged during transportation.Transportation documents
• Packaging Requirements: It is necessary to attach a Dangerous Goods Declaration (DGD), MSDS report, Test Summary (UN38.3) and Certificate of Conformity.
• Reeses Law is a child safety protection law formulated by the United States for button batteries and related products. The following are the key requirements of the regulation:Button batteries

III. Interpretation of Reeses Law

: Including single - cell button batteries with a diameter greater than the height (maximum diameter of 32 mm).

Scope of Products Involved

• Consumer products containing button batteries: Such as remote controls, electronic toys, watches, etc. Whether the battery is replaceable or not, it must comply with the regulation.
• Battery compartment designIt must prevent children from opening or accessing the battery.

Specific Requirements

• The battery compartment must meet the requirements of tool - opening or double - action opening.:
  • After abuse testing, the battery must not fall off.
  • Comply with the Poison - Prevention Packaging Standard 16 CFR 1700.15.
  • The battery type, voltage and instructions for non - replaceable batteries should be marked on the packaging.
• Packaging Requirements:
  • Complies with the Poison Prevention Packaging Standard 16 CFR 1700.15.
  • The battery type, voltage, and an indication that the battery is non - replaceable need to be marked on the packaging.
• Warning label:
  • Clear warning labels should be attached to the packaging and the product, and first - aid guidelines for childrens accidental ingestion of batteries should be provided.

IV. The Role of Export Compliance and Agency Services

1. Export RepresentationThe main functions of the service

• Market access consultation: Export agents are familiar with the laws and regulations of the target market and can assist enterprises in quickly mastering the certification requirements of the importing country, such as FDA certification, CPSC filing, etc.
• Document Preparation: The agency service company can assist enterprises in preparing the necessary documents for customs clearance, such as commercial invoices, bills of lading, packing lists, certificates of conformity, etc.
• Logistics and transportation coordination: Ensure that button batteries meet the requirements for the transportation of dangerous goods in international transportation and avoid transportation risks.
• Customs clearance and tax payment support: The agency company can assist enterprises in handling customs clearance procedures and tax calculations in the destination country, reducing the difficulty of export.

Export Compliance Recommendations

• Pre - certification: Apply for necessary certifications in advance, such as IEC 62133 testing, CB certification, CE marking, etc.
• Dynamic regulation follow - up: Pay attention to the updates of regulations in the target market, such as the implementation time and specific clauses required by the US Reese Act.
• Regular quality review: Ensure that button batteries always meet safety and environmental protection requirements during the production and export process.

V. Summary

The export of button batteries must strictly comply with the laws and regulations of the target market to ensure that the products meet the requirements of safety, environmental protection, and packaging labels. During the export process, enterprises can use the services of professional export agency companies to improve export efficiency and reduce compliance risks. Mastering the latest regulatory dynamics and technical requirements will provide an important guarantee for enterprises to explore the international market.