I. Standard Release Cycles after Customs Inspection (Country - by - Country Comparison)Equipment ExportII. 3 Core Variables Affecting Release Timeliness

III. Practical Solutions to Shorten Release Time

Electromechanical products need to provide an additional SNI certification (Indonesian national standard)Since 2023, a 10 - digit HS code breakdown system has been implemented. Declaration errors will trigger a second inspection

• Hai Phong Port, Vietnam
• : Shortened to 1 - 3 working days under the customs clearance efficiency improvement project

Motors with a power exceeding 75kW need to apply for an energy efficiency certificateLaem Chabang Port, Thailand

• 需提前上傳機電產品檢測報告至VNACCS/VCIS系統
• : Routine inspection takes 2 - 5 working days

Pay special attention that motor - type equipment requires the submission of TISI certificationCustoms valuation disputes are the main cause of delays (accounting for 42%)

• Variable 1: Completeness of Documents
• Leading to a 35% increase in cases of customs clearance delays in Indonesia

IV. Emergency Plan for Delay Handling

Vietnamese customs require that the technical parameter table of mechanical equipment must include Chinese - English - Vietnamese language對照

• 缺失FORM EIt is recommended to verify through the following methods:Variable 2: Accuracy of Commodity Classification
• It is recommended to use the ASEAN - wide electromechanical product classification database (ASEAN HS Explorer)

Variable 3: Customs Risk Rating

• HS編碼前6位錯誤將觸發100%開箱查驗
• The Royal Malaysian Customs (JKDM) implements enterprise credit classification management

The inspection rate of AEO - certified enterprises is reduced to less than 5%

• Application of the Pre - declaration System (PCS)
• Thailand and the Philippines have made it mandatory to submit electronic manifests 24 hours before container loading

Jakarta Port, Indonesia

It is recommended to use an intelligent classification tool to pre - review the HS code (with an accuracy rate of up to 98.6%)

• Standardization of Compliance Document Packages
• Must include: ? Material test report issued by a third - party institution (including RoHS directive compliance statement) ? Equipment installation instructions (safety warning signs should be reflected) ? Original factory authorized distribution certificate (to deal with the widespread intellectual property inspections in Southeast Asia)

The inspection exemption rate for AEO - mutual - recognized enterprises between China and Malaysia, and China and Thailand has increased to 82%

• Key Construction: ?

AEO認證實施路徑

• Traceability system (3 - year complete logistics records need to be retained) ? Compliance management internal audit mechanism (update the customs regulations database quarterly)
• When there is an overdue detention (taking the Philippines as an example): import and exportSubmit a “Customs Inspection Objection Application” within 72 hours (accompanied by a review report from a testing agency)

: The average inspection time for machinery products is 3 - 7 working days

Activate the customs bond system (Bonded Warehouse) to avoid the accumulation of port detention fees

1. Launch the “Fast - track Processing Channel” through the local chamber of commerce (67 successful cases at Manila Port in 2023)
2. In 2024, the demand for machinery in Southeast Asia is expected to increase by 11%. By establishing a country - specific customs clearance database and implementing a dynamic compliance monitoring system, enterprises can shorten the average release time to 2.4 working days. It is recommended that exporters participate in the target countrys customs policy online seminars quarterly to continuously optimize supply chain resilience.
3. Launch the Fast - track Processing Channel through the local chamber of commerce (There were 67 successful cases at the Port of Manila in 2023)

Conclusion

Machinery in Southeast Asia in 2024equipment. For example, Indonesia has the SNI certification, Thailand has the TISI certification, and the Philippines has the BPS certification. It is necessary to confirm in advance the equipment voltage (such as 380V/50Hz in Thailand), the compatibility of the CE certification, and the proof of environmentally friendly materials.The demand is expected to increase by 11%. By establishing a country - specific customs clearance database and implementing a dynamic compliance monitoring system, enterprises can shorten the average release time to 2.4 working days. It is recommended that exporters participate in the online seminars on the customs policies of the target countries quarterly to continuously optimize the supply chain resilience.